calculated load
英 [ˈkælkjuleɪtɪd ləʊd]
美 [ˈkælkjuleɪtɪd loʊd]
网络 计算载荷; 计算负荷
双语例句
- As another way to understand the impact of smoking, the researchers calculated a "smoking load" for each smoker by multiplying the number of cigarettes smoked per day by the number of years smoked.
为了更好地理解吸烟的影响，研究者为每个吸烟者计算“吸烟负荷”，将吸烟者每天吸烟的支数乘以吸烟年数。 - This paper calculated the load of formwork and bracket, and mapped out a feasible scheme by adopting scientific technologies.
通过对该影院施工模板、支架承载情况的计算，采用科学的施工技术，制定了切实可行的施工方案。 - The slump-mass stability of Baishapo in the Three Gorge reservoir area was calculated under main load composes by nonlinear finite element method.
应用非线性有限元法对三峡库区白沙坡崩滑体在多种工况下的稳定性进行了计算。 - By the statistical parameters of Chongqing statistics department, the regression curve that can be used to predict house calculated load was fitted.
并以一组重庆市统计局提供的统计数据，拟合出可用于住宅计算负荷预测的回归曲线。 - The prediction method of house calculated load by the regression analysis in which independent variable is the total power of household appliances was presented.
提出对住宅计算负荷，以家用电器总功率为自变量，采用回归分析的预测方法。 - The effects of processing parameters on the load, strain distribution and temperature field have been analyzed The results show that the calculated value of load is close to the measured one under different extrusion conditions, the relative error is less than 10%.
结果表明：不同挤压条件下的挤压力模拟值与实测值相对误差小于10%，模拟结果与实际值比较接近； - Then the initial stress was calculated with proper load and the assembly process simulation.
模拟装配夹紧过程施加载荷约束，并计算该过程中钢板弹簧内部产生的预应力。 - This paper discussed the theoretically die reinforcing function of cement mortar and reinforced steel to the wall built by laying bricks or stones, analyzed and calculated the load force anti-sheared, and gave out thr structure requirements paying attention in the construction at the same time.
本文从理论上论述了水泥砂浆面层及钢筋网水泥砂浆面层对砌体的加固作用，并对其抗剪承载力进行了分析和验算，同时提出了施工应注意的构造要求。 - The loading process is designed on the basis of the cracking and yielding loads and earthquake action as calculated for seismic load of fortification intensity.
根据计算的各抗震设防烈度对应的地震作用及开裂荷载、屈服荷载设计出加载制度；采用液压伺服装置进行低周反复荷载试验。 - Taking a certain clay core dam as an object of calculation and the Duncan-Chang double curve non-linear model as the embankment filling both displacement and stress values of the dam have been calculated by applying load in 8 stages.
以某粘土心墙坝作为计算对象，坝体填料采用邓肯&张双曲线非线性模型，利用中点增量法计算了坝体在八级加载情况下的变位和应力值。 - The Influence of the Cold Load of Fresh Air on the Calculated Cold Load of Air Conditioning
新风冷负荷对空调计算冷负荷的影响 - The Analysis of Calculated Load for Inland River High-speed Ship
内河高速船规范设计载荷分析 - Considering the torsion effects caused by the earthquake load, two methods calculated the lateral load distribution for asymmetric structures are established.
针对平面不规则混凝土框架结构，考虑地震作用对其产生的附加扭转振动效应，提出了两种计算侧向力分布的方法。 - Employing the method which is suggested in the criterion, contribution proportion of vehicles for traffic load was calculated by axel load conversion.
使用规范建议的方法，对各种车辆的轴载进行标准换算，计算各种车辆在道路交通荷载中的比例。 - Analysing the factor of calculated load with the use of probability theory
利用概率方法分析计算负荷系数的选取 - The paper studied the dilatancy of different rock and the stimulation principle, calculated the explosive load, designed the technological process, and analyzed the testing result of well stimulation.
文章对不同岩石压胀特性、压胀松动增产技术的基本原理进行了研究，对该技术的现场用炸药药量的计算及弹体进行了设计，对现场试验应用情况进行了总结。 - Improved through the IEEE-RBTS reliability test system, calculated the node load correlation and uncertainties related to the reliability of the grid, and verified the correctness of the model.
通过对改进的IEEE-RBTS可靠性测试系统的计算，分析了节点负荷相关性和不确定性对电网可靠性的影响，从而验证该方法的正确性。 - Its several dangerous working conditions were been determined. Analyzed and calculated its load in all conditions. The method of load combination was proposed.
确定了臂架的几种危险工况，分析计算了其在各工况下所受的具体载荷；提出了载荷组合的方法。 - In the second chapter, first introduced the main structure of the safety interlock electric lift scaffold, and then calculated the dead load, construction live load and wind load which are the scaffold to withstand, and conclude that the actual work load.
第二章首先介绍了安全互锁式电动升降脚手架的主要构造，然后计算得出了该脚手架所承受的恒荷载、施工活荷载和风荷载，并得出了实际工作时的荷载。 - The train load is calculated as equivalent static load only in the road engineering.
对于列车动荷载的模拟，在以往的基坑支护中很少考虑，只是在道路工程中把列车荷载当做等效的静荷载进行计算。 - Based on the data, we draws curves of every parts, analyses their hysteretic character mastics and calculated its load carrying capacity, ductility performance, the stiffness retrogression, energy dissipation and so on.
依据试验数据，绘制各试件的滞回曲线，分析试件的滞回性能，计算试件的承载能力、位移延性、刚度退化、耗能能力等抗震性能的指标。 - And then the reliability analysis of the structure is carried out. The reliability index and failure probability are calculated. The critical load and the reliability index of the bar are analyzed under the influence of initial eccentricity.
在此基础上进行了结构的可靠性分析，计算了结构的可靠性指标和失效概率，并分析了初偏心影响下杆件的临界载荷及可靠性指标。 - Under the immovable operating condition, this paper calculated the thermal load of heat pump drier, determined configuration of device and relevant size, and analyzed the functions of the device.
在定工况条件下对热泵干燥装置负荷进行计算，确定了系统设备的配置和相应的选型，分析了装置可实现的功能。 - Then calculated the calculation load of the differential gear based on the optimum parameters of the motor, and then designed the differential planetary gears, the axle gears and the axle.
根据优化设计得到的电机参数计算出机械差速器齿轮的计算载荷，并由此设计出了差速器行星齿轮和半轴齿轮以及半轴。 - The compensation result depends on the parallel APF, the velocity and precision of the real-time calculated load current setting value.
本文所述DVR补偿效果依赖于并联APF的补偿效果及实时运算出的负载电流给定值的速度及精度。 - Dangerous working conditions of them were been determined. Analyzed and calculated its load in all conditions. Methods of load applying and constraint handling were been proposed.
分析了它们的危险工况，提出了其载荷加载及约束处理方法。